Parts

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

Art Gecko is our new grippy polyurethane rubber bar tape with a colorful artistic patter on the drops. This pattern is called a tri-color tessellation. When wrapped from the bottom it fades to black about where the brake levers mount. - Artistic pattern, 9 colorful choices - Color below the drops, black up top - Great feel, Polyurethane rubber surface - 220 cm rolls, plenty of length - Nice flat wrap - 92 grams including the plugs

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Cable hanger and straddle cable - Alloy construction - Anodized finish - Great for Canti and U-Brakes

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

Campagnolo small parts for bottom brackets.

Campagnolo EKAR disc brake adapters. - Includes bolts

Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals. - Kit includes 2 bearings and 2 seals

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimized by hand in Denmark. This ultrafast chain has been optimized for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 600 km/370 miles. Apply CeramicSpeed UFO Drip after 600km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. CeramicSpeed uses chains from high-end brands to which an optimization treatment is applied. The CeramicSpeed UFO Chains go through a multi-step process, which involves polishing, cleaning, and application of two layers of treatment to achieve the most efficient chain possible. The UltraFast Optimization process is not highly technical, but it is very time consuming. In The Box: - 116 link Optimized Chain - Quick Link - Single Use UFO Drip sample - Disposable Gloves - Sticker Sheet

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.

Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Heavy duty bolt-on aluminum seatpost clamp.

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

ABI Headset Bearing for new builds or replacements.

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting

The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting

Seated pressure relief for male road cyclists. Flat contour, yet still comfortably padded. The overall shape and the relief channel with its deep cut-out perfectly match the male anatomy in a low, forward-tilted riding position typical of road cycling. The highly sensitive perineal area is effectively unloaded, preventing any discomfort. OrthoCell Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel.

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Replacement air valve assemblies for Fox suspension.

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA Standard Headset Bearings

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube. - Lower part of the headset sold separately

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Adventure handlebars from FSA are double butted, tapered, and shot-peened AL6061. - 31.8mm bar clamp diameter with 34 x 21 ergonomic oval section - 125mm drop, 80mm reach - 12° side flare

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Fi'zi:k's line of Tempo bar tapes are designed for an unparalleled performance. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is their chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. The classic touch is a durable perforated leather-like texture, with traditional aesthetic and smooth surface slide easily to different riding positions. - Bondcush construction 3mm thick - Classic touch

Fi'zi:k's line of Tempo bar tapes are designed for an unparalleled performance. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is their chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. Soft touch is a matt-look, silky, moisture absorbing surface. - Bondcush construction 3mm thick - Soft touch

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)