Indoor Cycling

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

Tacx NEO 2T with pre-installed Shimano/SRAM 9-11 Body. A cassette is not included. You will need a cassette of the same type and speed as your bike. THE PINNACLE OF INDOOR TRAINING, RAISED EVEN HIGHER With an improved design and revamped components, the NEO 2T Smart trainer provides a more immersive experience, measures total power and left/right balance, and more. - Reduced vibrations mean a quieter ride. So go ahead, really let loose. - You care a lot. So we measure a lot. Like power and cadence to within 1% accuracy. - Are you balanced? See your left/right leg power balance on your app or Edge® bike computer - It’s the closest thing to riding outdoors you’ll ever find indoors. - You don’t have to miss the feel of the road. It’s right here. Experience Complete Immersion THE SOUND OF SILENCE Redesigned magnets have significantly reduced the internal air displacement and vibrations, resulting in a remarkably silent trainer. A MORE COMFORTABLE RIDE NEO 2T Smart reacts instantly to speed or incline changes and allows for movement to the left and right while cycling, following the natural course of your body. DYNAMIC INERTIA To simulate an outdoor ride indoors, dynamic inertia controls mass inertia and compensates for weight, speed and angle of inclination to make your ride feel more realistic. ADD MORE REALISTIC MOTION To complement the left-to-right movement of your NEO 2T trainer, snap on a pair of motion plates (sold separately) to allow more realistic multidirectional movement. Adopt a more natural position, and train even more effectively. ROAD FEEL This feature works with Tacx software or the Zwift app to make the trainer vibrate and simulate the feeling of riding on different road surfaces, such as cobblestone and gravel. ULTIMATE IMMERSION When connected to an external power source, descent simulation accurately simulates a downhill drive. Get the ultimate indoor training tools. POWERFULLY BUILT NEO 2T Smart features a new motor design that delivers more power at low speeds, resulting in a highly improved ride feel during a climb or acceleration. READY TO SPRINT 32 integrated neodymium magnets allow for a high brake force and high power levels. NEO 2T Smart ensures maximum stability, even during explosive sprints, up to 2,200 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 25% gradient. ACCURATE AND RELIABLE Keep track of your performance and progress with reliable, consistent measurements — no calibration needed. That includes power, speed and cadence, measured accurately within 1%. It's fully connected, so you can train your way. HIGHLY COMPATIBLE NEO 2T Smart communicates via BLUETOOTH® Smart technology and ANT+® FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect NEO 2T Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more. Specs: General - DIMENSION: 22.6" x 29.5" (575 x 750 mm) - HEIGHT: 21.7" (55 cm) - WEIGHT: 47.4 lbs (21.5 kg) Connectivity - WIRELESS COMMUNICATION: ANT+ connectivity, BLUETOOTH wireless technology - CONTROL BY: Smartphone, tablet, ANT+ bike computers, stand-alone, computer connection via ANT+ antenna - READ OUT ON: Smartphone, tablet, bike computer, computer with ANT+ antenna - CONNECTION INDICATOR (ANT+/BLUETOOTH): 2 LEDs - POWER INDICATOR: Multicolor LED, spot on floor Indoor Training Features - MAGNETS: 32 neodymium magnets - ELECTRICAL REQUIREMENT: 110-240 Volts SUITABLE CASSETTES - Shimano/SRAM 9 to 11 speed compatible - Campagnolo (compatible, requires special cassette body) - SRAM 12 speed/XDR (compatible, requires special cassette body) - Shimano 12-speed Hyperglide+ SUITABLE AXLES: - Direct Drive quick release axle (130 mm/135 mm X 5 mm) for bikes with quick-release axle - Thru-axle end caps (142 mm/148 mm X 12 mm) for bikes with thru-axle - MAX POWER: 2200 Watt - MAX INCLINE: 25% - SIMULATION OF DESCENT: Yes - MAX TORQUE: 88 Nm - MAX BRAKE FORCE: 260 N - FLYWHEEL: Virtual - MASS INERTIA: Variable to 275.6 lbs (125 kg) - CALIBRATION: No calibration needed - OUTPUT: Speed, cadence, power - ACCURACY: <1%

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width