Tools/Maintenance

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Specifically formulated for Fox dropper posts

Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below

Arundel T-wrench 3,4, 5mm Our Cr-Mo steel T-wrenches are constructed in one-piece, from lost was investment castings. They are tumbled to size before being nickel plated, to reduce rust. Designed to fit within the contents of your seat bag, our T-wrenches are compact, yet big enough to provide a bit of leverage for making adjustments. - Investment cast Cr-Mo steel - Nickel plated to reduce rust - Small enough for a seat bag, but big enough to leverage

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

- CNC side panels with a lightweight, easy to carry, ultra-compact design - 8mm hex bit combines easily with 5mm allen wrench - Independent valve core tool - CO2 inflator tool - Tools: 2, 2.5, 3, 4, 5, 6, 8mm Hex, PH2, T25, SL5, Valve Core Tool, CO2 inflator - Sizes: 88 x 54 x 8mm (TBC) - Weight: 114g

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

- OE replacement kit for Finish Line Pro Chain Cleaner, includes brushes, scrubbers and pins

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

Dirty drive train? We have you covered. Bike and wheels covered in mud? No problem! This is the perfect basic kit to clean and lube your bike. - 1 Liter Bike Wash - Bio-Degreaser, 500ml - 50ml Bio Dry Lube - Claw Brush